- Series 704LS is a lift-and-slide, sliding door system that seperates the sliding and sealing from the locking action, allowing the door to virtually hover over the frame when in motion.
- On opening, the unique roller design engages and lifts the sliding door panel off the frame, allowing the door to slide effortlessly with minimal friction.
- On closing, the door panel lowers and engages with the weather seal.
- AS1428.1 wheelchair compliant sill creating a continuous path of travel as required to meet the National Construction Code.
- Doors have been tested for compliance with the relevant Australian Standards. Achieved a high water resistance of 300Pa.
- The extra strong multi hollow meeting stiles allow large sliding doors to be fabricated in high wind load areas, refer panel strength tables.
- This door has been tested to 3300mm high and tested to 2500mm wide.
- Available in a selection of common door configurations (XF, FX, FXXF and corner doors).
- We can fit Centor roller screens behind Series 704 sliding doors up to 7400mm wide.
- Square clean lines with soft radius edges on internal meeting stile corners.
- Aluminium sub-sills are standard under Series 704LS doors. We have a variety of sub-sills to choose from.
- Sub-sills are fitted with integrated co-extruded Santoprene drainage hole cover flap to prevent blow-back.
- Doors are compatible with Series 406 single glazed FrontGLAZE™ and Series 426 double glazed FrontGLAZE™ framing.
- Optional AWS Trickle Vent passive ventilation system can be fitted into tubular sub-head.
- Door panels will accept glass up to 8.50mm and 24mm double glazed IGU's.